20:74:06:12Central cooling components for inspection --

Exclusions. A home inspector shall inspect central cooling components as follows: (1) The inspector shall observe and report on the following: (a) Type of unit (i.e., central air, heat pump, evaporative cooler); (b) Manufacturer (if visible); (c) Operation of the unit unless outside air temperature is less than 65 degrees Fahrenheit and verification of cooling of air; (d) Physical condition; and (e) Air flow within house; (2) The inspector is not required to: (a) Test or evaluate wall or window mounted units; (b) Evaluate efficiency or adequacy of system; (c) Operate systems that are covered or otherwise shut down; or (d) Open panels other than those designed for routine homeowner maintenance.

Source: 28 SDR 28, effective September 2, 2001.